$1,099.00


HS9500 SELF-RECOVERY WINCH
The HS stands for High Speed. The 9500 stands for the rated line pull. Fast vehicle retrieval was designed into this winch series right from the start. That's because most off-road winching situations require driving and steering while pulling. The faster the no-load line speed, the less likelihood the vehicle will drive over the wire rope. Fast retrieval also reduces the chances of bird's nesting and over-wraps that damage wire rope. So the HS9500 is the perfect blend of speed, efficiency, torque, reliability and durability.

HS9500 SPECS/PART NUMBERS:

Part Numbers: PN 48500 (12V DC), PN 485002 (12V DC, CE)

Rated line pull: 9500 lbs. (4310 kgs.) single-line

Motor: 4.6 hp, Series WoundTM

Remote Control: Remote switch, 12' (3.7m) lead

Gear train: 3-Stage Planetary

Gear ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 80 lbs. (36.3 kgs.)

Wire rope: 100', 5/16"diameter (30m, 8mm diameter)

Replacement wire rope: PN 27110

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery leads: 2 gauge, 72" (1.83m)

Finish: Argent Powder Coat

Nuts/bolts: PN 39625

CE winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

12V DC PERFORMANCE SPECS:

 

Line Pull
Lbs.(Kgs.)
0
2000(910)
4000(1810)
6000(2720)
8000(3630)
9500(4310)		 Line Speed
Ft./min.(M/min.)
62(18.9)
16.3(4.97)
11.8(3.60)
9.31(2.84)
7.59(2.31)
6.67(2.03)
 		 Motor
Current
47 amps
160 amps
230 amps
305 amps
370 amps
425 amps
 		 Pull by layer:
layer/Lbs(Kgs.)
1/9500(4313)
2/8650(3927)
3/7920(3595)
4/7400(3359)
5/6940(3150)


Above performance specs are based on first layer of drum




Winch Dimensions: 23.2" L. x 6.3" D. x 7.6" H.
(588.7mm L. x 160mm D. x 193.3mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)