M15000 SELF-RECOVERY WINCH
This WARN winch boasts new high strength carrier plates to handle the gear train stresses of a 15,000 lb load. The gear ratio is 315:1, with 90 feet of 7/16" wire rope equipped with a large latched hook. The control pack is designed for generous clearance and ease of access.

M15000 SPECS/PART NUMBERS:

Part Numbers: PN 47801 (12V DC), PN 478022 (24V DC, CE)

Rated line pull: 15000 lbs. (6800 kgs.) single-line

Motor: 12V 4.6 hp , 24V 2.5 hp Series WoundTM

Remote Control: Remote switch, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear ratio: 315:1

Lubrication: Molylube #1 or Aeroshell #17

Clutch (freespooling): Rotating Ring Gear

Brake: Automatic Direct Drive Cone

Drum diameter/Length: 3.5"/8.2" (9cm/21cm)

Weight: 136 lbs. (62kgs.)

Wire rope: 90', 7/16" diameter (27m, 11mm diam.)

Replacement wire rope: PN 61950

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery leads: 2 gauge, 72" (1.83m)

Finish: Argent Powder Coat

Nuts/bolts: PN 61946

CE winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead and safety hook.

12V DC PERFORMANCE SPECS:

 

Line Pull
Lbs.(Kgs.)
0
2000(910)
4000(1810)
6000(2720)
8000(3630)
10000(4540)
12000(5440)
14000(6350)
15000(6800) 		Line Speed
Ft./min.(M/min.)
22.2(6.77)
7.27(2.22)
5.41(1.65)
4.43(1.35)
3.79(1.16)
3.31(1.01)
2.93(.893)
2.61(.796)
2.48(.756) 		Motor
Current
67 amps
135 amps
185 amps
235 amps
285 amps
335 amps
385 amps
435 amps
460 amps 		Pull by layer:
layer/Lbs(Kgs.)
1/15000(6804)
2/13890(6300)
3/11520(5225)
4/9840(4463)
 


24V DC PERFORMANCE SPECS:

 

Line Pull
Lbs.(Kgs.)
0
2200(910)
4400(2000)
6600(300)
8800(4000)
11000(5000)
13200(6000)
15000(6800)
 		 Line Speed
Ft./min.(M/min.)
28(8.6)
10.2(2.3)
7.5(2.3)
6.9(2.1)
6.6(2.0)
6.2(1.9)
5.2(1.6)
4.3(1.3)
 		 Motor
Current
24 amps
85 amps
115 amps
142 amps
170 amps
190 amps
210 amps
235 amps
 		 Pull by layer:
layer/Lbs(Kgs.)
1/15000(6800)
2/13900(6300)
3/11400(5200)
4/9700(4400)
 


Above performance specs are based on first layer of drum





Winch Dimensions: 25" L. x 8.5" D. x 11" H.
(556mm L. x 215mm D. x 279mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)