|
 |
|
$899.00
|
X8000i SELF-RECOVERY WINCH
This winch is the little brother of the XD9000i, with many of the same features.
Its 4.8 horse power Series Wound motor and our proven three-stage planetary
gearing helps it deliver a no-load line retrieval speed of 42 feet per minute.
The full-load pull rate is over 8 ft. per minute. Plus, its integrated control
pack and direct drive, cone braking system are reliable and quiet.
X8000i SPECS/PART NUMBERS:
Part Numbers: PN 28401 (12V DC), PN 284012 (12V DC, CE)
Rated line pull: 8000 lbs. (3630 kgs.) single-line
Motor: 4.8 hp, Series WoundTM
Remote Control: Remote switch, 12' (3.7m) lead
Gear train: 3-Stage Planetary
Gear ratio: 216:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 74 lbs. (34 kgs.)
Wire rope: 100', 5/16" diameter (30m, 8mm diameter)
Replacement wire rope: PN 27110 (PN 38314, CE)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72" (1.83m)
Finish: Argent Powder Coat
Nuts/bolts: PN 29570
CE winches: CE products are designed to meet European
Standards. CE winches include CE labels, Manuals, Safety Hook and Thimble.
12V DC PERFORMANCE SPECS:
Line Pull
Lbs.(Kgs.)
0
2000(910)
4000(1810)
6000(2720)
8000(3630)
|
Line Speed
Ft./min.(M/min.)
42(12.8)
16(4.88)
11.9(3.63)
9.79(2.98)
8.01(2.44)
|
Motor
Current
80 amps
200 amps
285 amps
350 amps
435 amps
|
Pull by layer:
layer/Lbs(Kgs.)
1/8000(3629)
2/7280(3302)
3/6670(3026)
4/6230(2826)
|
Above performance specs are based on first layer of drum
Winch Dimensions: 21.02" L. x 6.3" D. x 9.94" H.
(534mm L. x 160m D. x 252mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
|
