White Knight Applications for Chevy HD

Factory Hitch Applications

Click any image to enlarge

Price

Part # 4196 Step Bumper Mount Light Unit
This light unit is to be used with Part# 4168 Under Hitch Installation Kit. This light kit will clamp to the 2-1/2" Factory hitch and mounts up against the bottom of the hitch and allows use of the hitch for towing.

$99.95

Part # 4168 2007-2010 GM HD Pickup
Under Hitch Mount Kit
This installation kit is used with our Light Unit Part# 4196. It clamps to the Factory 2-1/2" hitch and mounts the light unit to the bottom of the hitch to allow full used of the hitch for towing.

$18.75

Part# 4168 Installed Photo

Part # 4149 PLUG N GO adapter
This adapter can be used for installation of the White Night light unit without having to do any wire splicing. It inserts into a vehicle's 7- pin trailer wiring plug and has a 3-wire pigtail that plugs up to the light unit. This adapter has a flip up lid and socket for full 7- pin trailer hookup.

$13.99

Part # 4198 2" Insert Mount light unit
This light unit has a 2" stainless steel tube mount that is inserted into the vehicle's 2" receiver hitch and secured with a hitch pin. This light unit can be used on applications where towing is not a priority as it will have to be removed from the hitch whenever the hitch is used for towing. Can be used when fifth wheel or gooseneck towing is primary towing method.

$99.95

Aftermarket Hitch Applications

Part # 4199 Fixed Mount Light Unit
This light unit mounts to the under the bumper 2" receiver hitch tube with a u-bolt and is open thru the center to allow the use of a 2" hitch insert for towing. The White Night emblem in the center of the unit may be removed to allow a hitch insert to be inserted into the hitch receiver tube. NOTE: This light will not fit the larger 2-1/2" hitches.

$99.95

Our Fixed Mount light unit, Part # 4199 will fit most aftermarket hitches. As there are may different designs of hitches it is hard for us to list each one. In order for the light unit to fit there must be between 3/4" and 1" of clearance between the top of the hitch tube and the bottom of the bumper. The light dimensions are 4" tall x 4" deep x 15-1/2" long.