Our Under Hitch Mount kit uses our Part # 4196 light unit along with
Part # 4155 Under Hitch Installation Kit. This setup clamps the
light to the bottom of the factory hitch back towards the rear of
the hitch.
| |
Factory Hitch Applications
|
Click any image to enlarge
|
Price
|
| |
|
|
|
| |
Part # 4196 Step Bumper Mount Light Unit
This light unit is to be used with
Part # 4155under hitch installation kit. This light
kit will mount to the bottom of the hitch back towards the
spare tire and will allow full access to the hitch for
towing.
|
 |
$99.95
|
| |
|
|
|
| |
Part # 4155 Dodge Ram Under Hitch Installation Kit. This
installation kit is used with our Part # 4196 light unit and
mounts to the bottom of the hitch. This kit is simple to
install with no drilling involved. Allows full use of the
hitch for towing. Can use our Part # 4149 PLUG N GO wiring
adapter for an installation without having to do any wire
splicing.
|
 |
$16.00
|
| |
|
|
|
| |
Part # 4149 PLUG N GO adapter
This adapter can be used for a installation of the White
Night light uni without having to do any wire splicing. It
inserts into a vehicle's 7- pin trailer wiring plug and has
a 3-wire pigtail that plugs up to the light unit. This
adapter has a flip up lid and socket for full 7- pin trailer
hookup.
|
 |
$13.99
|
| |
|
|
|
| |
Part # 4198 2" Insert Mount light unit
This light unit has a 2" stainless steel tube mount that is
inserted into the vehicle's 2" receiver hitch and secured
with a hitch pin. This light unit can be used on
applications where towing is not a priority as it will have
to be removed from the hitch when ever the hitch is used for
towing. Can be used when fifth wheel or gooseneck towing is
primary towing method.
|
 |
$99.95
|
| |
|
|
|
| |
No Receiver Hitch Application
|
|
|
| |
|
|
|
| |
Part # 4196 Step Bumper Mount Light Unit
This light unit is to be used on vehicles that have a step
type rear bumper and do not have a receiver type hitch under
the bumper. The light unit mounts to the bottom of the step
type bumper and can be attached by using a trailer ball or
by bolting to the bumper.
|
|
$99.95
|
| |
|
|
|
| |
Aftermarket Hitch Applications
|
|
|
| |
|
|
|
| |
Our Fixed Mount light unit, Part # 4199 will fit most
aftermarket hitches. As there are may different designs of
hitches it is hard for us to list each one. In order for the
light unit to fit there must be between 3/4" and 1" of
clearance between the top of the hitch tube and the bottom
of the bumper. The light dimensions are 4" tall x 4" deep x
15-1/2" long.
|
 |
$99.95
|
